Three simple steps to polish your Hardwood Floor

Hardwood floors are known for their elegant looks. They are the best and cannot be compared to any other type of floor. However, with time, they hardwood can get degraded due to scratches and lose it good old shine. This may leave many contemplating to totally change the floor. Well, this should not be the case and such thoughts should be cleared from the mind.

The hardwood floor is different and cannot be likened to common house items that get thrown away just because of damage or failure of one part to function properly. Polishing the hardwood floors revives them bringing the old shine back and most people will confuse them with new ones. Actually polishing returns them to the initial state they existed when they were installed first.


Steps in polishing the hardwood floor


1 Cleaning

The first step is to ensure your floor is cleaned thoroughly. Water and based solvents should be avoided at all costs when doing the cleaning as they can damage the floor. Commercial hardwood cleaners that have the ability to clear any stains are an ideal choice. A vacuum or broom can be used to remove all dust particles with easy. A nylon brush that is stiff enough can be used to clean extremely dirt areas.

2 Buffing

A machine called a buffer is used to do buffing. One can opt to rent this and use a screen with a minimum of 100grit. Buffing ensures the polish or finish applied to the hardwood will not peel after some time. It is aimed at preparing your floor for a new finish.

3 Polishing

This is the last step and is performed after buffing has been completed. A wax or a polishing solution can be used although paste is usually preferred. Pastes last longer giving your floor and extra shine when compared to wax or solutions. Paste is usually difficult to remove once it has been applied. If homeowners plan to do a refinishing sometime later, a polishing solution is preferred as it can be easily removed.

Application of wax or polishing solution is tedious and time consuming but better results are usually achieved when applied manually. The floor should always be clean and dry before application. One can apply the polishing solution several times depending the age of the floor and the type of timer used. The amount of people walking over it each day should also be considered.

It is ideal to apply polish after once a year but generally homes should have a more regular application after some few years and offices given some couple of years like six before application.

Leave a comment