November 2014

What Type of Padding Should I Use Under an Area Rug on a Hardwood Floor

Rug pads are very useful in protecting your area rug as well as your floor from absorbing stains and colors. These pads holds an area rug in its position thereby preventing it from sliding. There are various rug pads meant for different types of floors. A wooden floor will require a different type of padding unlike tiled, stone on vinyl floors. Rug pads protect rugs from molds by preventing water from sipping through the rug. Besides making hardwood floors easier to vacuum, rug pads also prevent this type of flooring from developing indentations which is a major problem to wooden flooring. When choosing a rug pad for your hardwood floor, pay attention to the following guideline.

Rebond Padding

This is one of the various types of polyurethane padding which is made entirely from recycled foam products. Since it can be cut into various sizes, they can easily fit into your area rug without a hassle. Rebond polyurethane padding provides incredible protection and insulation for hardwood flooring. You may also consider other forms of polyurethane padding including froth and prime padding. While the latter is mostly used in sofas, chairs and mattresses, the former is used for various is used in finishes amongst other uses. Rebond and prime padding are excellent for hardwood floors but froth padding often causes discoloration of the hardwood floor.

Sponge Rubber Padding

SCI-Berber-Supreme-Carpet-Pad-3939-SW-MD

You can either choose flat rubber or waffle rubber types of sponge rubber padding. Consider using the flat rubber padding for high traffic areas as well as preventing the hardwood floor from furniture indentations. They can be used for both heavy and light rugs unlike the waffle padding which can only be used for heavy rugs. Rubber padding isn’t recommended for polyurethane-coated hardwood floors as they can cause dimpling.

Felted Fiber Padding

This type of padding exist in two types: natural and synthetic. The synthetic one is made from nylon, polypropylene, polyester and other polyvinyl materials. When these man-made materials are put up together, they create flat sheets of felt which are strong enough to be used for both heavy and light area rugs. On the other hand, the natural fiber padding is made from plants and animal hair. They are safe for hardwood flooring and they can last for years so long as they are well maintained. When these fibers are processed, they also form flat sheets of felt which can be used underneath any type of an area rug.

Depending on your budget and preference, you should be able to choose one of the aforementioned types of padding that suits your hardwood floor.

Three simple steps to polish your Hardwood Floor

Hardwood floors are known for their elegant looks. They are the best and cannot be compared to any other type of floor. However, with time, they hardwood can get degraded due to scratches and lose it good old shine. This may leave many contemplating to totally change the floor. Well, this should not be the case and such thoughts should be cleared from the mind.

The hardwood floor is different and cannot be likened to common house items that get thrown away just because of damage or failure of one part to function properly. Polishing the hardwood floors revives them bringing the old shine back and most people will confuse them with new ones. Actually polishing returns them to the initial state they existed when they were installed first.

 

Steps in polishing the hardwood floor

index_hardwood_021.gif

1 Cleaning

The first step is to ensure your floor is cleaned thoroughly. Water and based solvents should be avoided at all costs when doing the cleaning as they can damage the floor. Commercial hardwood cleaners that have the ability to clear any stains are an ideal choice. A vacuum or broom can be used to remove all dust particles with easy. A nylon brush that is stiff enough can be used to clean extremely dirt areas.

2 Buffing

A machine called a buffer is used to do buffing. One can opt to rent this and use a screen with a minimum of 100grit. Buffing ensures the polish or finish applied to the hardwood will not peel after some time. It is aimed at preparing your floor for a new finish.

3 Polishing

This is the last step and is performed after buffing has been completed. A wax or a polishing solution can be used although paste is usually preferred. Pastes last longer giving your floor and extra shine when compared to wax or solutions. Paste is usually difficult to remove once it has been applied. If homeowners plan to do a refinishing sometime later, a polishing solution is preferred as it can be easily removed.

Application of wax or polishing solution is tedious and time consuming but better results are usually achieved when applied manually. The floor should always be clean and dry before application. One can apply the polishing solution several times depending the age of the floor and the type of timer used. The amount of people walking over it each day should also be considered.

It is ideal to apply polish after once a year but generally homes should have a more regular application after some few years and offices given some couple of years like six before application.